Use And Care Manual
12
ASSEMBLY
ASSEMBLING THE RUBBER FEET AND
WHEELS
See Figure 3.
Mount the rubber feet as shown in figure 3.
Tighten firmly with an open-end wrench (not included)
to secure it in position.
Rubber foot packing list:
– Screw M8 (2)
– Washer (2)
– Rubber Foot (2)
– Nut M8 (2)
Mount the wheels as shown in figure 3.
Tighten firmly with an open-end wrench (not included)
to secure the wheels in position.
Wheel packing list:
– Screw M10 (2)
– Wheel (2)
– Nut M10 (2)
WHEEL
SCREW
M10
NUT M8
NUT M10
SCREW M8
RUBBER FOOT
WASHER