User Manual

8
Viper | R/C Combat Robot Kit
1. The tinyESCs in the Viper kit have special push
connectors crimped onto the motor leads.
2. Connect the blue wire (labeled “M2”) of one
tinyESC onto one motor’s red-dot terminal.
Connect the purple wire (“M1”) to the motor’s
second terminal. This will be the left motor.
3. Connect the purple wire (“M1”) of the other
tinyESC to the right motor’s red-dot terminal.
Connect the blue wire (“M2”) to the motor’s
other terminal.
Assembling The Viper
Left motor
Red Dot - Blue Wire
Right motor
Red Dot - Purple Wire
FingerTech Robotics | Assembling The Viper