User Manual
23
R/C Combat Robot Kit | Viper
TroubleshooTing
Problem Solution
Motor controller LED is
blinking slowly.
Check that your transmitter is on.
Try re-binding the receiver to the
transmitter.
Motor turning the wrong
direction.
Re-solder the motor wires to the
opposite motor leads.
Motor spins slowly when
not holding transmitter
stick.
Adjust the transmitter’s Trim lever
for the corresponding channel.
No Response with power
switched on.
Make sure the bind plug is out of the
receiver.
Try re-binding the receiver to the
transmitter.
Batteries getting hot. Make sure no red/black leads are
connected to each other. This would
create a short circuit.
FingerTech Robotics | Troubleshooting