User Manual

19
R/C Combat Robot Kit | Viper
Lithium Polymer Batteries
Your kit comes with a 2-cell (2S, or
7.4V) lipoly battery. For more
power and speed, it can be
upgraded to a 3-cell (3S, or 11.1V)
pack. If you are adding a servo or
other electronics, make sure they can handle the higher
voltage! (Most servos cannot.)
Modifying a Power Plug for Recharging
If you lose your Power/Charge Plug, here is how to solder
a “Male JST connector” to a 3.5mm mono plug for
recharging batteries:
Now you can plug your charger into the power switch
and recharge without removing the Viper’s lid!
Upgrades
FingerTech Robotics | Upgrades
Red wire to center terminal