User Manual

Viper | R/C Combat Robot Kit

This process is already done for you, but for future

robots it is good to know how to bind your

transmitter to more receivers.

The 2.4GHz radio set included with your kit does

not use crystals to pair the receiver to the

transmitter like older radios. Instead they are

“bound” together by programming. To bind, insert

the included “bind plug” into the battery port (BAT)

of the receiver.

Power on the receiver by removing the robot’s

power plug. A dim red LED inside the receiver will

start flashing.

Holding the BIND button on the transmitter, turn

on the transmitter, and wait for the red LED inside

the receiver to go from flashing to solid-on.

Remove the bind plug, and it’s done! Turn the

transmitter off, robot off, transmitter on again, and

lastly the robot on again. (Always follow this order.)

Binding Your radio

Binding Your Radio

| FingerTech Robotics