User Manual

15
R/C Combat Robot Kit | Viper
17. Remove the power plug to turn the robot on.
When the robot is on, each motor controller’s
LEDs blink to say different things:
Slow blink
(red)
No data coming from the radio.
(Motor failsafes to off.)
Rapid blink
(green)
Transmitter stick is in the forward half
of its travel
Rapid blink
(red)
Transmitter stick is in the reverse half of
its travel
Solid on
(green/red)
Transmitter stick is at full travel in either
forward or reverse
Solid on
(green)
If the calibration pins are jumpered, this
indicates calibration mode.
Assembling The Viper
Assembling The Viper
| FingerTech Robotics