User Manual

ManualsBrandsFingertech Robotics Manuals2 & 3 Wheel RobotsFingerTech 'Viper' Combat Robot Kit V2

12

Viper | R/C Combat Robot Kit

8. Tighten the power

jack onto the

baseplate using its

finger-nut. Pliers

can help get it tight.

9. Slide the Snap Hubs onto

the motor shafts and

tighten both setscrews.

(Use threadlock.)

10. Push the tires over the

hubs, then the washer.

11. Load a snap ring onto

your Snap Ring Pliers.

Squeeze and compress

the tire and push the

washer past the snap

ring groove. Hold the

washer in place with one hand and install the

snap ring.

Assembling The Viper

FingerTech Robotics | Assembling The Viper