Instruction Manual

22
CONTENTS
inserted for example user ID 12345” > “Deletion is successful. Delete User. Please
input user number” > Repeat to insert user ID to delete > (undetermined steps ) >
“The system returns to verification mode”
To delete all users including the user for an administrator card: Plug keyboard to
terminal > The LED of keyboard lit up > Insert keyboard password >
“Password
confirmation is successful” > Press button 9 > Press ENTER > Press button 9 > Press
ENTER >
“Delete All Users. The operation is successful. The system returns to
verification stage. Please register the administrator card”.
After the operation, the H2i will be completely empty. You must re-enroll adminis-
trator card into the terminal to start over.
Con guring IP address, Subnet Mask and Gateway
by using USB numeric keypad
In case you are going to install multiple H2i in an environment, setting up IP ad-
dress to every H2i becomes troublesome. Now you may consider using the USB
numeric keypad to ease the job.
Plug keyboard to the terminal > The LED of keyboard lit up > The Green LED blinks
> Insert password via keyboard >
“Password confirmation is successful” > Press
button 4 > Press ENTER >
“Please enter the IP address” > Insert IP address using
keyboard, example 198.168.1.2 > Press ENTER>
“key operation is successful >
“Please enter the Subnet Mask” > Insert Subnet mask using keyboard, example
255.255.255.0 > Press ENTER > * “key operation is successful >
“Please enter the
Gateway” > Insert Gateway using keyboard, example 192.168.1.1 > Press ENTER >
“key operation is successful” > “Please enter the Device ID > Insert Device ID
using keyboard, example 2 > Press ENTER >
“key operation is successful” >
“System returns to verification mode”
Restoring The Terminal to Default Factory Setting
Plug keyboard to terminal> The LED of keyboard lit up > insert keyboard password
>
“Password confirmation is successful” > Press button 3 > Press ENTER > Press
button 3 > Press ENTER >
“Restore to default settings. The operation is success-
ful” > The system returns to verification mode.