Owner manual

14
Di erent Veri cation Methods
Check with your terminal’s hardware user manual or with your FingerTec reseller to make
sure that your model comes with the Different Verification Method. Kindly skip this sec-
tion if your terminal does not come with this feature.
To Configure Different Verification Methods: Click User Access Control tab > Click User Ver-
ify Type > Select verification method(s) > Select users for the different verification method
> Click the left arrow to include selected users > Click Update Terminal to send settings to
terminal > Check terminal ID and click Apply > Click Close to finish.
Note
By default, all users use FP/PW/RF (user verifies by fingerprint, FP; password, PW; or
cards, RF).
REVIEWING USERS’ TIME ZONE
You can review the users in a terminal to make sure they are grouped in the correct Time
Zone, Group Times and Different Verification Methods.
To Review Users’ Group Settings: Select Check User tab > Select Terminal ID to download
user information from > Click Download Users > Click Apply > Click Close to finish.