Owner's manual

12
CONTENTS
3 • CONNECTION  SYNCING FACE ID
Installations and Communications
At the rear of Face ID, there are 6 connections available for
power and communications.
Back of Terminal
1
USB Port
Linking with USB flash disk for remote data transfer.
2
TCP/IP Port
Connecting
with CAT 5 cable for LAN connection, one end
to this port and another to the computer’s TCP/IP Port.
TCP/IP for Single Connection – Linking Face ID to
a single computer using TCP/IP requires Ethernet
10/100Base-T Crossover Cable.
T
he cable can be used to cascade hubs or to connect
Ethernet stations back-to-back without a hub. It works
with both 10Base-T and 100Base-TX.
Joint 1 Pin Joint 2 Pin
TX+ 1
• •
3 RX+
TX- 2
• •
6 RX-
RX+ 3
• •
1 TX+
RX- 6
• •
2 TX-
1 8
TOP
FRONT
1 8
1
23456