User Manual

5
This is a Door Lock Timer
Lengthen timing
Shorten timing
2
These are the power outputs from AdapTec. Refer to the wiring diagrams in page 3, for
details.
3
Power LED – a lit LED indicates power supply/power input module is working.
EM lock LED– a lit LED indicates that the AdapTec Plus is working to power up door
lock system.
Contact your local reseller or
[e-mail] in case either LED is not lit up.
Door lock timer
Users can adjust the timing for the EM Lock and Drop Bolt to close after opening using
the door lock timer. Turn the timer using a screwdriver; turning clockwise will lengthen
the time, turning anti-clockwise will shorten the time.
Note: AdapTec Plus can be connected to other devices which have the same power con-
sumption. Please consult FingerTec’s advice through
[e-mail] before using
AdapTec with other FingerTec models.