Owner manual

4
Emergency Alerts with Siren
Compatible with an NC siren type with a maximum of 0.5A load for an
emergency event e.g. if the terminal is being dismantled without authori-
zation.
Seamless Integration with FingerTec Terminals
Mix and match the FingerTec terminals via AdapTec Plus for a cost effec-
tive access control system suitable for small and medium sized offices.
UNDERSTANDING THE TECHNICAL SPECIFICATIONS
PHYSICAL APPEARANCE
Surface finishing Acrylonitrile Butadiene Styrene (ABS)
Dimension, mm 212 x 49 x 114
Weight, kg 0.6
CPU High Performance RISC CPU
POWER SUPPLY
Power input AC 110 ~ 240V (Universal Input)
Power output 12VDC 3A
Backup Power system UPS or 12VDC Rechargeable battery
INPUT – OUTPUT SIGNAL
I
nput signal 26-bit FingerTec encrypted Weigand signal
Output signal 12VDC 0.5A Siren
12VDC 3A EM output (NO/NC Type door locks)
ALERTS & NOTIFICATIONS
Over input voltage Yes, 3 long beeps
Door release Yes, 2 short beeps
Door force open Yes, continuous beeps (May opt to output external siren system)
Illegal dismantle Yes, continuous beeps (May opt to output external siren
FingerTec terminals system)
Door unlock timer VR type, LED blinks to indicate unlock time in Seconds.
On Board LED indicators EM LED lit up – door lock output is working.
Status LED lit up – CPU is working.
Battery low LED lit up – Battery is low and cut-off.
ON BOARD PROTECTION
Over voltage alarm >15 VDC
Fuses PTC type
Battery cut-off 8.5 ~ 9.5 VDC
NOTE: Specifications are subject to change. Check http://product.fingertec.com for latest product
information.