User Manual

TCP/IP port

TXD

RS232 cable RXD

GND

CTS

26 bits RTS

weigand WD0

output WD1

GND

RS485 cable 485A

485B

DC 12V 3A GND

Power Supply PWR

Door Sensor SEN

(NO or NC) GND

Push Release BUT

button NO

EM lock/ COM

Drop Bolt NC

Warner/ AL+

Alarm device AL-

Alternatively, user could opt to use AdapTec AC, a controller

come power supply to connect a reader to a computer and/

or to door accessories. Go to

http://user.fingertec.com to

find out more about AdapTec.

Note

Power cable Communication I/O controller AC800 Reader

FOR AC800 PLUS AND AC800 PLIS MC SERIES

Diagram showing available connections on AC800 Plus and AC800 Plus MC Series. The AC800

Plus and AC800 Plus MC have the same available connections.

STARTUP AND SHUTDOWN

FOR AC800 SERIES

1. Connect the communication I/O controller to the FingerTec® AC800 model.

2. Turn on the power supply.

3. Press the power button to switch on or shutdown the reader.