User's Manual

ManualsBrandsFine Offset Electronics ManualsElectronicsWireless Weather Station (Transmitter)

USER MANUAL

This manual is part of this product and should be kept in a safe place for future reference. It contains

important notes on setup and operation.

Introduction

Thank you for purchasing this Wireless Rain Gauge. Designed ofr everyday use, the weather station will

prove to be an asset of great value for your personal use in the home or office. Please read this instruction

manual thoroughly to fully understand the correct operation of your rain gauge and benefit from its unique

feature

Package contents

z 1x Weather station base unit

z 1x Rain Sensor

z Mounting Screw

z Instruction manual

Function:

1) Detail display of rainfall data in 1hour, 24hour, week and total since last reset(user selectable in inch

or mm)

2) Radio controlled Clock with manual setting option

3) Calendar (day-month-year display)

4) Indoor temperature ( or )℃℉

5) Time zone setting

6) 12 or 24 hour time mode

7) Free standing

Installation

Rain Gauge battery install

Note: please note the polarity when inserting/replacing batteries in the unit, failure to do so may

result in permanent damage. Use good quality alkaline batteries and avoid rechargeable batteries.

)

Remove the batter

cove

1) Remove Rain Gauge cove

Summary of content (4 pages)

PAGE 1
USER MANUAL This manual is part of this product and should be kept in a safe place for future reference. It contains important notes on setup and operation. Introduction Thank you for purchasing this Wireless Rain Gauge. Designed ofr everyday use, the weather station will prove to be an asset of great value for your personal use in the home or office.
PAGE 2
3) Observing the correct polarization insert 2 “AAA” Alkaline Batteries into the compartment and replace the cover. Note: when opening the battery cover make sure that the batteries do not spring free from the contacts since this will cause start and transmisison problem Indoor receiver battery installs 1) Insert two AA batteries into the indoor receiver.
PAGE 3
Mounting Base Station With one foldable legs at the back of the unit, the base station can be placed onto any flat surface or wall mounted at the desired location by the hanging holes at the back of the unit. It is important to check that the radio signal can be received before permanently mounting any of the units Remote Sensor Place the rain gauge in an appropriate location. The rain gauge has a range of 100meters.
PAGE 4
*Note: “DST OFF” indicates that the feature is off and the WWVB will not change times automatically. “DST ON” indicates that the feature is on and the WWVB will change times automatically. Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time, and should select “DST OFF”. Troubleshooting No signal from remote sensor There can be many reasons for this, the following steps should help you troubleshoot this problem.