User Manual

Version 2.0 Page 11
Command
Function
Description
Settings
SET/CH +
2 seconds
BEEP
Turns on or off the beep
with each keystroke
Press TEMP/+ or BARO/- to toggle
OFF and ON
SET/CH
RST
Reset max/min daily at
12:00am (on) or manually
(off)
Press TEMP/+ or BARO/- to toggle
OFF and ON
SET/CH
ZON
Time Zone (TZ)
Press TEMP/+ to increase or
BARO/- to decrease (reference
Figure 9).
SET/CH
DST
Observe Daylight Savings
Time (set to OFF in
Arizona and Hawaii, ON
everywhere else)
Press TEMP/+ or BARO/- to toggle
OFF and ON
SET/CH
12H
12/24 Hour Format
Press TEMP/+ or BARO/- to toggle
between 12 hour (12h) and 24 hour
(24h) format
SET/CH
HR
Hour of Day
Press TEMP/+ to increase. BARO/-
to decrease
SET/CH
MIN
Minute of Day
Press TEMP/+ to increase. BARO/-
to decrease
SET/CH
M-D
Month Day Format
Press TEMP/+ or BARO/- to toggle
between M-D (month/day) format
and D-M (day/month) format
SET/CH
Y
Year
Press TEMP/+ to increase and
BARO/- to decrease
SET/CH
M
Month of Year
Press TEMP/+ to increase and
BARO/- to decrease
SET/CH
D
Day of Month
Press TEMP/+ to increase and
BARO/- to decrease
SET/CH
°F
Temperature Units of
Measure
Press TEMP/+ to toggle between °F
and °C
SET/CH
inHg
Barometric Pressure Units
of Measure
Press TEMP/+ to toggle between
inHg and hPa
SET/CH
PRESSURE
REL
Relative Pressure
Calibration
Press TEMP/+ to increase. BARO/-
to decrease. For details on relative
barometric pressure calibration,
reference Section 4.2.2.
SET/CH
NTH
Northern Hemisphere
(NTH) or southern
Hemisphere (STH) select
Press TEMP/+ to toggle between
Northern and southern Hemisphere
SET/CH
Exit Set Mode
Figure 8