User's Manual

Receiver Model : HP3002
Sensor Model : WH31E
Version 1.0 Page 17
If the measured value is less than the high alarm, an audible alert will sound and the alarm icon
will flash on the alarm panel, and the alarm icon will appear on the main panel.
When an alarm has been triggered, the alarm will sound for 120 second and the corresponding alarm
icon will flash until the alarm condition is no longer met. Press any key to silence the alarm.
The alarm icon is color coded, and will flash as shown in Figure 17 if one or more alarms are
triggered.
Alarm Type
Color
High Alarm
Red – grey - red
Low alarm
Blue – grey - blue
High alarm & Low alarm both activated
Red – grey – blue – grey – red
Beep alarm stop
grey
Figure 17
Scroll to the Humidity or Temperature Alarm On/Off switch, and press the key
to toggle the Humidity or Temperature Alarm On or Off.
Scroll to the Humidity Alarm or Temperature Alarm field, and press the key to
display the alarm programming panel, as shown in Figure 18.
Note: The alarm must be turned On to program the alarm settings.
Referring to Figure 18, scroll to the channel and alarm limit, and press the or
key to adjust the alarm limit up or down. Scroll to the alarm field and press the
key to turn the alarm bell on our off to activate the alarm.