User's Manual

Version 2.1 ©Copyright 2015, Page 3
Figure 2
2 GettingStarted
Note: The power up sequence must be performed in the order shown in this section (remote
transmitter first, Display Console second) to avoid the console synchronization time out.
The WH117L weather station consists of a display console (receiver), and a thermo-hygrometer
(remote transmitter).
2.1PartsList
QTY Item
1 Display Console
Frame Dimensions (LxWxH): 7.25 x 4 x 1.25 in
LCD Dimensions (LxW): 4.25 x 2.50”
1 Thermo-hygrometer transmitter (WH2F) with mounting bracket
Dimensions (LxWxH): 3.5” x 2.5” x 0.9”
2.2RecommendTools
 Philips precision screwdriver
 Drill for mounting bracket
2.3Thermo‐HygrometerSensorSetUp
Note: To avoid permanent damage, please take note of the battery polarity before inserting the
batteries.
Remove the battery door on the back of the sensor with a Philips screwdriver (there is only one screw,
at the bottom of the unit). Insert two AAA batteries as shown in Figure 3.