User Manual

4. Fasten the mounting pole to your mounting pole or bracket
(purchased separately) with the two U-bolts, mounting pole brackets
and nuts, as shown in Figure 6.
Tighten the mounting pole to your mounting pole with the U-Bolt
assembly, as shown in Figure 7..
Figure 6
Figure 7
there are four alphabet letter of “N”,”E”,”S”and “W”
representing for the direction of North, East, South and
West, as Figure 8. Wind direction sensor has to be
adjusted so that the directions on the sensor are
matching with your real location. Permanent wind
direction error will be introduced when the wind
direction sensor is not positioned correctly during
installation.
Level the sensors
Use the bubble level on the rain sensor as a guide to
verify that sensors are level.
- 6 -
Figure 8
Figure 9