User Manual

Version 1.0 Page 4
2.4.1 Display Console Layout
Figure 3
1
Outdoor Temperature
2
Indoor Temperature
3
Indoor Humidity
4
Outdoor Temperature High / Low Record
5
Indoor Temperature High / Low Record
6
Indoor Humidity High / Low Record
7
Wireless Reception Icon
2.4.2 Sensor Operation Verification
Verify the indoor and outdoor temperature match closely with the console and sensor array in the same
location (about 5 to 10’ apart). The sensors should be within 2°F (the accuracy is ± 1°F ). Allow
about 30 minutes for both sensors to stabilize.
3 Wireless Sensor Installation
It is recommended you mount the remote sensor in a shaded area. Direct sunlight and radiant heat
sources will result in inaccurate temperature readings. Although the sensor is water resistant, it is best
to mount in a well-protected area, such as under an eve.
3.1 Mounting with Zip Tie
Figure 4