User's Manual

6
Mounting the thermo-hygro sensor
Fix the whole set to a pole
same as rain sensor
with the two adjustable hoops.
 The anemometer’s cable is connected
to the input on the wind direction
sensor.
 The wind direction sensor’s cable is
connected to the input marked Wind on
the thermo-hygro sensor
 The rain sensor’s cable is connected to
the input marked Rain on the solar
panel
 The solar panel’s cable is connected to
the input marked Rain on the
thermo-hygro sensor.
The solar transmitter
The solar transmitter makes use of solar energy to power the instruments they are connected
to.
Note: It use AA size alkaline rechargeable batteries. For the solar transmitters to function
properly, make sure the solar receptors on the transmitters are exposed to sunlight and the
connectors of the connection cable are securely plugged in.
For best results, direct solar panel as follows:
Solar panel facing north if you reside in the southern hemisphere; Solar panel facing south if
you reside in the northern hemisphere.
Display Unit
1. Display Console Layout