User's Manual

WeatherSmart PC Software User Manual

1.0 General Information

The Weather station is a weather monitoring device that achieves displays and records the

weather data from internal and external sensors. Besides the indoor temperature, indoor humidity

and air pressure measured by internal sensor, it will receive the outdoor temperature and humidity,

wind and rainfall. Light & UVI and Heat index transmitted by outdoor sensor as well.

After installing the ―WeatherSmart‖ program on the CD-ROM in package, It can show you all the

weather data from the base station including data from both indoor and outdoor sensors.

For operation, simply use the USB cable supplied and connect the Base Station to the PC. From

now on you can start to track current and history weather information at your finger tips.

2.0 System Requirements

To install the ―WeatherSmart‖ software onto your PC, the minimum requirements for PC

are as follows:

Operating System: Windows NT4 (Service Pack >= 6a), Windows 2000, Windows XP, Windows

Vista. Windows 7, Windows 8,Windows 10,MAC

Base Station and PC must be connected by USB cable

3.0 Installation of the “WeatherSmart” Software

Firstly, the Base Station and the Outdoor Sensors should be connected and checked for correct

function (see Operation Manual for Professional Weather Station for setting up the Weather

Station). After successful checking, install the ―WeatherSmart‖ software as follows:

1. Switch on your PC and insert the CD-ROM into the CD-ROM Drive.

2. Double click ―WeatherSmart.exe‖‖

3. Select the installation process language option and click ok

4. click next and select the destination folder(change directory when needed)

5. click next and select the shortcut folder(change directory when needed)

6. click next and select the additional tasks.

7. Click next and setup is now ready to begin installing Weather Smart on your computer.

8. Click install, software will be installed automatically

9. Press Finish to finish the installation process and exit. If you tick ―Launch WeatherSmart‖

the software will start to run.

10. From ―Start—All Programs—WeatherSmart‖ path and double click the ―WeatherSmart‖

icon to start application.

Note: The graphic function needs the software to be installed under the administrator account. If it

is installed under limited user accounts, the graphic function of the software might not be working

correctly.