User Manual

- 16 -
3.1.4 Temperature unit setting (℃ / ℉, default ℃)
3.1.5 Barometric unit (hPa / inHg / mmhg, default hPa)
3.1.6 Wind speed unit (km/h, m/s, bft, mph, knots default: m/s)
3.1.7 Rainfall unit (mm, inch, default: mm)
3.1.8 Solar Rad. unit (lux,fc,w/㎡)
3.1.9 Rainfall display（Rain Rate, Rain Day, Rain Week, Rain Month, Rain Year）
Rain Rate: it forecast the rain per hour base on the recently 10 minute’s rainfall. For example: the rainfall of
recent 10 minutes is 12mm, the rain/hour is 12mm*6=72mm/h.
Note: The rain per day is reset to zero at 0:00hr every day. The rain per week is reset to zero at 0:00hr
every Sunday, per month is reset to zero at 0:00hr every first day of the month. The reset of the rain per year
refer to rainfall season section
3.1.10 Graph time (12/24/28/72 hour, default 72hour)
3.1.11 Backlight setting
While in Menu Setting Mode, press
key to select Backlight Setup field, press or key to enter
backlight Setup mode:
Automatic control backlight: select this option, the backlight will auto turn on and off according the set time
Turn on the backlight: set the time of turn on backlight
Turn off the backlisth: set the time of turn off backlight
Automatic brightness adjustment: select this option, the brightness will change according to the light intensity
measured from outdoor sensor
Maximum brightness: set the maximum brightness while it is the highest light intensity
Minimum brightness: set the minimum brightness while it is the weakest light intensity
Icon Description
Select key
Press this key to select the unit or scrolls the value
Select key
Press this key to select the unit or scrolls the value.
Left key
Press this key to select the set value.
Right key
Press this key to select the set value.
Up arrow key
Press this key to change the activated option field