Instructions / Assembly

ATTACHING THE SLIDE
BAR TO THE WALL
5.1
Use a pencil to mark the
points on both sides where
the slide bar will be
attached to the wall.
5.2
Use a size 8 drill bit to drill
holes at the marked points.
5.3
Insert wall anchors (A) into
the drilled points on the
wall. (Light tapping with
mallet may be necessary)
5.4
Holding the fixed glass
panel on the fixed bottom
guide, insert screws (I) into
the wall anchors.
5.5
Press the slide bar into the
holes and secure it with the
Allen key.
8
A
I
B
5
5.1 5.2 5.3 5.4 5.5
Ø8 DRILL BIT
J