Instructions / Assembly

6
3
B
3 3/8"
4 1/2"
H
C
ALLEN KEY ALLEN KEY
F
3.1
3.2
3.3
PREPARING THE SLIDE
BAR
3.1
Insert holders (H) into the slide
bar (C), using set screws and the
Allen key.
One holder should be at a
distance of 4 cm (about 1 9/16”
inches) from the edge, and the
other at a distance of 3 cm (about
1 1/16” inches) from the edge.
3.2
Once the holders are attached,
press the stoppers (F) into the
slide bar and remove screws, as
shown in the diagram.
3.3
Insert the wall mount brackets (B)
to both ends of the slide bar.