Instructions / Assembly

5
INSTALLING THE DOOR
BOTTOM GUIDE AND
THE PANEL CLIP
2
N
L
O
M
2.1
2.2 2.3
Ø6 DRILL BIT
2.1
Use a size 6 drill bit to drill
holes at the marked points on
the floor.
2.2
Insert the wall anchors (N) into
the drilled holes.
(Light tapping with mallet may
be necessary)
2.3
Holding the door bottom
guide (O) and fixed panel clip
(M) on the floor, secure them
to the floor with screws (L),
using a screwdriver.