Installation & Assembly

F O R A LIFE O F S T YLE
TM
206 wembly Road.
New Windsor, NY 12553
Phone: [phone]
Fax: [phone]
info@nextures.com
www.nextures.com
READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT
SINGLE-HANDLE LAVATORY FAUCET
INSTALLATION INSTRUCTION
1. Please check that all components are present.
2. Before installation ensure that all feed lines are clear of
debris and on/off valve is present.
3. Ensure water pressure is between 20-125 PSI
(Includes
combination of hot and cold feed lines).
4. Pictures in the manual are general in content and may
not represent exactly your purchased faucet. If you are
having difficulties please contact a professional plumber.
5. If you will be away from home for an extended period
you should shut off the main water supply.
PLEASE NOTE BEFORE INSTALLATION
INSTALLATION MANUAL
Tools You Will Need ·
Hexagon wrench
Adjustable wrench
Pipe Tape
1.Use a soft cloth and vinegar to remove hard-water spots.
2. Check aerator (if present) regularly for calcium build up
are when water stream is not optimum.
3. DO NOT use caustic cleaning products as the use will
break down finish and will void the product warranty.
4. Acceptable cleaners include vinegar or mild non-abrasive
liquid detergents.
5. If the water pressure appears to be less than optimum
remove, inspect,clean or replace aerator.
DAILY MAINTENANCE