Assembly Instructions

ManualsBrandsFinDreams Technology ManualsComputers & AccessoriesAntenna

In-vehicle detection antenna assembly

1、Function and purpose: Send low-frequency signals to detect electronic keys.

2、Power supply mode: controller power supply

3、 External interface: VBAT, GND

4、Product shape and size (product photos or design drawings can be provided)

Model Name: S6-3642400-D1, FCC ID: 2A5DH-S6-3642400-D1

Model Name: S6-3642400, FCC ID: 2A5DH-S6-3642400

Exterior:

weight

：

48g

size：256mm*30mm*17mm

Model Name: G3-3642300, FCC ID: 2A5DH-G3-3642300

Exterior：

weight：39.3g

size：96.6mm*27.2mm*18mm

Summary of content (5 pages)

PAGE 1
In-vehicle detection antenna assembly 1、Function and purpose: Send low-frequency signals to detect electronic keys. 2、Power supply mode: controller power supply 3、 External interface: VBAT, GND 4、Product shape and size (product photos or design drawings can be provided) Model Name: S6-3642400-D1, FCC ID: 2A5DH-S6-3642400-D1 Model Name: S6-3642400, FCC ID: 2A5DH-S6-3642400 Exterior: weight：48g size：256mm*30mm*17mm Model Name: G3-3642300, FCC ID: 2A5DH-G3-3642300 Exterior： weight：39.3g size：96.6mm*27.
PAGE 2
Model Name: HC-3642600, HC-3642600-Y1, Exterior： weight：31g size：191.5mm*14.9mm*24.4mm SCED-3642300 Exterior： weight：30.9g size：96.6mm*44mm*17.1mm EG-3642300 Exterior： weight：62g size：153.2mm*31.4mm*33.
PAGE 3
ST-3642300 Exterior： weight：48g size：256.4mm*17mm*13.3mm EM2E-3642600/EM2E-3642600Z Exterior： weight：57.6g size：711.5mm*14.9mm*24.4mm 5.RF Specifications： 6.Product usage scenarios PKE\PKS 7.The electrical parameters of the product, input and output voltage and current, etc. Steady state operating current 120mA Inrush current and locked rotor current 200mA Maximum operating current 2A 8.The wireless parameters of the product, such as the frequency used, the modulation method 125KHz±3KHz Modulation：ASK 9.
PAGE 4
10.What is the specific communication of wireless transmission (reception) specifications, Bluetooth, wifi, 2/3/4/5G working frequency band low frequency communication 11. Transmit and receive power No rated power, calculated from the controller supply voltage and current.
PAGE 5
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement.