Datasheet

ManualsBrandsFINDER ManualsRelays AccessoriesRelay socket 1 pc(s) 40 series, 44 series 40.52, 40.61, 44.62

Power relays 1 and 2 pole for direct PCB or

socket mount

Type 40.31

- 1 CO 10A (3.5mm pin pitch)

Type 40.51

- 1 CO 10A (5mm pin pitch)

Type 40.52

- 2 CO 8A (5mm pin pitch)

• DC coils (standard or sensitive) or AC coils

• Cadmium-free contact material

• 8 mm Creepage and Clearance, 6 kV (1.2/50µs)

between coil and contact

• 95 series sockets for PCB or 35 mm rail

mounting (EN 60715) with Screw, Screwless or

Push-in terminals

• Coil Indication and EMC suppression modules

99 series and Timer module 86.30 options

• Environmental protection:

RT II - flux proof (Standard)

RT III - wash tight (Option)

40.31 40.51 40.52

• 1 CO 10 A

• 3.5 mm pin pitch

• PCB or 95 Series socket mount

• 1 CO 10 A

• 5.0 mm pin pitch

• PCB or 95 Series socket mount

• 2 CO 8 A

• 5.0 mm pin pitch

• PCB or 95 Series socket mount

Copper side view

Pin length 5.3mm for

PCB or sockets

Copper side view

Pin length 5.3 mm for

PCB or sockets

Copper side view

Pin length 5.3 mm for

PCB or sockets

For UL ratings see:

“General technical information” page V

For outline drawing see page 10

Contact specification

Contact configuration 1 CO (SPDT) 1 CO (SPDT) 2 CO (DPDT)

Rated current/Maximum peak current A 10/20 10/20 8/15

Rated voltage/

Maximum switching voltage VAC 250/400 250/400 250/400

Rated load AC1 VA 2500 2500 2000

Rated load AC15 (230VAC) VA 500 500 400

Single phase motor rating (230VAC) kW 0.37 0.37 0.3

Breaking capacity DC1: 30/110/220V A 10/0.3/0.12 10/0.3/0.12 8/0.3/0.12

Minimum switching load mW (V/mA) 300 (5/5) 300 (5/5) 300 (5/5)

Standard contact material AgNi AgNi AgNi

Coil specification

Nominal voltage (U

) VAC (50/60Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240

VDC

5 - 6 - 7 - 9 - 12 - 14 - 18 - 21 - 24 - 28 - 36 - 48 - 60 - 90 - 110 - 125

Rated power AC/DC/sens. DC VA (50Hz)/W/W

1.2/0.65/0.5 1.2/0.65/0.5 1.2/0.65/0.5

Operating range AC (0.8…1.1)U

(0.8…1.1)U

DC/sens. DC (0.73…1.5)U

/(0.73…1.5)U

(0.73…1.5)U

/(0.73…1.5)U

(0.73…1.5)U

/(0.73…1.5)U

Holding voltage AC/DC 0.8

/0.4

0.8

/0.4

0.8

/0.4

Must drop-out voltage AC/DC 0.2

/0.1

0.2

/0.1

0.2

/0.1

Technical data

Mechanical life cycles 10·10

10·10

Electrical life at rated load AC1 cycles 200·10

200·10

100·10

Operate/release time ms 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive)

Insulation between coil

and contacts (1.2/50µs) kV 6 (8 mm) 6 (8 mm) 6 (8 mm)

Dielectric strength

between open contacts VAC 1000 1000 1000

Ambient temperature range °C –40…+85 –40…+85 –40…+85

Environmental protection RT II** RT II** RT II**

Approvals (according to type)

** See general technical information “Guidelines for automatic flow solder processes” page II.

II-2016, www.findernet.com

SERIES

40 SERIES

PCB/Plug-in relays from 8 to 16A

Summary of content (20 pages)

PAGE 1
40 SERIES PCB/Plug-in relays from 8 to 16 A 40 SERIES 40.31 Power relays 1 and 2 pole for direct PCB or socket mount 40.51 40.52 Type 40.31 -- 1 CO 10 A (3.5 mm pin pitch) Type 40.51 -- 1 CO 10 A (5 mm pin pitch) Type 40.52 A -- 2 CO 8 A (5 mm pin pitch) • DC coils (standard or sensitive) or AC coils • Cadmium-free contact material • 8 mm Creepage and Clearance, 6 kV (1.2/50µs) • • 1 CO 10 A • 1 CO 10 A • 2 CO 8 A • 3.5 mm pin pitch • 5.0 mm pin pitch • 5.
PAGE 2
40 SERIES 40 SERIES PCB/Plug-in relays from 8 to 16 A 40.61 Power relays 1 and 2 pole for direct PCB or socket mount Type 40.61 -- 1 CO 16 A (5.0 mm pin pitch) -- DC coils (standard or sensitive) or AC coils Type 40.xx.6 -- Bistable versions of the types 40.31, 40.51, 40.52 and 40.61 -- Bistable (single coil) DC or AC coils • Cadmium-free contact material available • 8 mm Creepage and Clearance, 6 kV (1.
PAGE 3
40 SERIES PCB/Plug-in relays from 8 to 16 A 40 SERIES 40.31 Power relays 1 pole for direct PCB or socket mount 40.61 Type 40.31 -- 1 CO 12 A (3.5 mm pin pitch) A Type 40.61 -- 1 CO 16 A (5.0 mm pin pitch) • Pin length 3.5 mm for PCB mount • Pin length 5.3 mm for Plug-in mount • DC coils (650 mW or 500 mW) • Cadmium-free contact material available • 8 mm Creepage and Clearance, 6 kV (1.
PAGE 4
0 SERIES 40 SERIES PCB/Plug-in relays from 8 to 16 A PCB relay Type 40.11 -- 1 CO 10 A - flat pack • DC (sensitive) coils • Cadmium-free contact material available • 8 mm Creepage and Clearance, 6 kV (1.2/50µs) between coil and contact • 1 CO 10 A • PCB mount 12.7 mm high For UL ratings see: “General technical information” page V Copper side view For outline drawing see page 10 Pin length 3.
PAGE 5
40 SERIES PCB/Plug-in relays from 8 to 16 A 40 SERIES Ordering information Example: 40 series PCB relay, 2 CO, 230 V AC coil. 4 0 . 5 A B C D 2 . 8 . 2 3 0 . 0 0 0 0 A: Contact material See table below Series Type 1 = PCB - 3.5 mm pinning, flat 3 = PCB/Plug-in - 3.
PAGE 6
40 SERIES 40 SERIES PCB/Plug-in relays from 8 to 16 A Technical data Insulation according to EN 61810-1 1 pole Nominal voltage of supply system V AC 230/400 Rated insulation voltage V AC 250 Pollution degree 3 2 pole 230/400 400 250 400 2 3 2 Insulation between coil and contact set Type of insulation Reinforced (8 mm) Reinforced (8 mm) III III kV (1.
PAGE 7
40 SERIES PCB/Plug-in relays from 8 to 16 A 40 SERIES Contact specification F 40 - Electrical life (AC) v contact current Types 40.31/51/61 F 40 - Electrical life (AC) v contact current Types 40.52 limit for 40.31/51 **Inductive load - AC15 Cycles Cycles Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 A Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 *limit for 40.31 * limit for 40.31, see page 3 ** Inductive load - AC15 for 40.
PAGE 8
40 SERIES PCB/Plug-in relays from 8 to 16 A 40 SERIES Coil specifications DC coil data - 0.5 W sensitive (types 40.31/51/52/61) Nominal Coil Operating range Resistance Rated coil voltage code consumption Umin Umax R I at UN UN V V V mA Ω 5 7.005 3.7 7.5 50 100 6 7.006 4.4 9 75 80 7 7.007 5.1 10.5 100 70 9 7.009 6.6 13.5 160 56 12 7.012 8.8 18 288 42 14 7.014 10.2 21 400 35 18 7.018 13.2 27 650 27.7 21 7.021 15.4 31.5 900 23.4 24 7.024 17.5 36 1150 21 28 7.028 20.5 42 1600 17.5 36 7.036 26.3 54 2600 13.
PAGE 9
40 SERIES PCB/Plug-in relays from 8 to 16 A 40 SERIES Contact specification R 40 - DC coil operating range v ambient temperature Standard coil R 40 - DC coil operating range v ambient temperature Sensitive coil, types 40.31/51/52/61 A 40.61 40.31/51/52 R 40 - DC coil operating range v ambient temperature Sensitive coil, type 40.11 R 40 - AC coil operating range v ambient temperature 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max.
PAGE 10
40 SERIES 40 SERIES PCB/Plug-in relays from 8 to 16 A Outline drawings Type 40.31/51/52/61 Type 40.31/61 Type 40.11 A II-2016, www.findernet.com * (3.5 or 5.
PAGE 11
95 SERIES Socket overview for 40 series relays 40 SERIES Module Socket Relay Description Mounting Accessories 99.02 95.P3 40.31 40.51 40.52 40.61 Panel or 35 mm rail (EN 60715) mount --Coil indication and EMC 95.P5 Push-in terminal sockets --For fast cable connection --Top terminals - Contacts --Bottom terminals - Coil 95.P5 See page 12 suppression modules A --Jumper link --Timer modules --Plastic retaining and release clip Module Socket Relay Description 99.02 95.03 40.31 95.
PAGE 12
95 SERIES Socket and accessories for 40 series relays 40 SERIES A 95.P5 Approvals (according to type): pending pending 095.91.3 060.72 060.48 Push-in terminals socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link 2-way jumper link (12.5 mm pitch) 2-way jumper link (4.6 mm pitch) Marker tag holder (for tags 060.48 and 060.
PAGE 13
95 SERIES Socket and accessories for 40 series relays 2-way jumper link for 95.P3 and 95.P5 sockets Rated values 40 SERIES 097.42 10 A - 250 V A 097.42 Marker tag holder for 95.P3 and 95.P5 sockets 097.00 86 series timer modules (12…24)V AC/DC; Bi-function: AI, DI; (0.05 s…100 h) (110…125)V AC; Bi-function: AI, DI; (0.05 s…100 h) (230…240)V AC; Bi-function: AI, DI; (0.05 s…100 h) 86.30.0.024.0000 86.30.8.120.0000 86.30.8.240.0000 097.00 86.30 99.02 Approvals (according to type): 99.
PAGE 14
95 SERIES Socket and accessories for 40 series relays 40 SERIES A 95.05 Approvals (according to type): ertain relay/socket C combinations 095.01 060.48 Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Marker tag holder (for tags 060.48 and 060.
PAGE 15
95 SERIES Socket and accessories for 40 series relays 95.55 Approvals (according to type): 095.91.3 060.48 Screwless terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) Modules (see table below) Timer modules (see table below) Sheet of marker tags for plastic retaining and release clip 095.91.
PAGE 16
40 SERIES 95 SERIES Socket and accessories for 40 series relays Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Identification tag Modules (see table below) Marker tag holder Sheet of marker tags for plastic retaining and release clip 095.91.
PAGE 17
95 SERIES Socket and accessories for 40 series relays 40 SERIES Screw (Box clamp) terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Identification tag Modules (see table below) Sheet of marker tags for plastic retaining and release clip 095.91.3 and for marker tag holder 097.
PAGE 18
40 SERIES 95 SERIES Socket and accessories for 40 series relays Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip 8-way jumper link Modules (see table below) Technical data Rated values Dielectric strength (between coil and contacts) Protection category Ambient temperature °C A 95.63 Approvals (according to type): Screw torque Wire strip length Max. wire size for 95.63 and 95.65 sockets 95.65 Approvals (according to type): 95.63 40.31 95.
PAGE 19
95 SERIES Socket and accessories for 40 series relays Approvals (according to type): 95.13.2 (blue) 95.13.20 (black) 95.15.2 (blue) 95.15.20 (black) 40.31 40.51, 40.52, 40.61 A 095.51 095.52 12 A - 250 V 10 A - 250 V* 6 kV (1.2/50 µs) between coil and contacts IP 20 °C –40…+70 * For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). With the relay 40.51 the change-over contact will be 21-12-14. 40.51 A1 12 11 14 A2 22 21 24 12 14 22 24 3.
PAGE 20