User Manual

86.30
www.findernet.com
1
4
5
3
2
5a
5b
B
A
C
86.30.0.024.0000
12…24 VAC (50/ 60 Hz)/DC
U
min
9.6 VAC/ DC
U
max
33.6 VAC/ DC
86.30.8.120.0000
110…125 VAC (50/ 60 Hz)
U
min
88 VAC
U
max
137 VAC
86.30.8.240.0000
230…240 VAC (50/ 60 Hz)
U
min
184 VAC
U
max
265 VAC
(–20…+50)°C
IP20
IB8630001 - 03/14
86.30 BI-FUNCTION AND MULTI-VOLTAGE
TIMER MODULE
WIRING DIAGRAM (Relay + Socket)
A = LED
B = Time delay adjustment trimmer
C = DIP Switch: time scales and functions
TIME SCALES (DIP "TIME")
Example: socket type 94.04 with relay type 55.34
and timer modules 86.30
To be connected to:
socket 90.02/03 and relay type 60.12/13
socket 92.03 and relay 62.32/33
socket 94.02/03/04 and relay 55.32/33/34
socket 95.03 and relay 40.31
socket 95.05 and relay 40.51/52/61 and 44.52/62
socket 95.55 and relay 40.51/52/61 and 44.52/62
socket 96.02/04 and relay 56.32/34
socket 97.01/51 and relay 46.61
socket 97.02/52 and relay 46.52
FUNCTIONS (DIP "FUNC")
(U = Supply voltage = NO output contact)
5a AI - On-delay
5b DI - Interval
NOTE
Time scales and functions must be set before energising the timer.
To achieve the minimum time setting of 0.05 seconds it is necessary
to use one of the functions with control signal.
When setting very short times it may be necessary to take into account
the operate time of the relay used.
Recovery time
: ≤ 50 ms
ENGLISH
1
2
3
4
5