Datasheet

ManualsBrandsFINDER ManualsRelays AccessoriesPlug-in module 1 pc(s)

86.00 86.30

Relay + socket

Features

See 56, 60 and 62 series relays See 40, 44, 46, 55, 56, 60 and

Note: Do not use with relays 62 series relays

62.3x.x012.x300 and 62.3x.x012.x600

12…240 12…24 110...125 230...240

12…240 12…24 — —

1.2 0.15

10.2…265 9.6…33.6 88...137 184...265

10.2…265 9.6…33.6 — —

(0.05...1)s, (0.5…10)s, (5…100)s, (0.5…10)min, (5…100)min, (0.5…10)h, (5…100)h

± 1 ± 1

≤ 50 ≤ 50

50 —

± 5 ± 5

See 56, 60 and 62 series relays See 40, 44, 46, 55, 56, 60 and 62 series relays

–20…+50 –20…+50

IP 20 IP 20

Wiring diagram Wiring diagram

(without control signal) (with control signal)

• Time scale: from 0.05s to 100h

• Multi-function

• Plug-in for use with 90.02, 90.03, 92.03

and 96.04 sockets

Contact specification

Contact configuration

Rated current/Maximum peak current A

Rated voltage/Maximum switching voltage V AC

Rated load AC1 VA

Rated load AC15 (230 V AC) VA

Single phase motor rating (230 V AC) kW

Breaking capacity DC1: 30/110/220 V A

Minimum switching load mW (V/mA)

Standard contact material

Supply specification

Nominal voltage (U

) V AC (50/60 Hz)

V DC

Rated power AC/DC W

Operating range V AC (50/60 Hz)

Technical data

Specified time range

Repeatability %

Recovery time ms

Minimun control impulse ms

Setting accuracy full range %

Electrical life at rated load in AC1 cycles

Ambient temperature range °C

Protection category

Approvals (according to type)

Relay + socket

AI: On-delay

DI: Interval

SW: Symmetrical flasher (starting pulse on)

BE: Off-delay with control signal

CE: On- and off-delay with control signal

DE: Interval with control signal on

EE: Interval with control signal off

FE: Interval with control signal on and off

Timer modules for use in conjunction with relay

& socket.

86.00 - Multi-function & multi-voltage

timer module

86.30 - Bi-function & multi-voltage

timer module

• Timer module type 86.00 for 90, 92, 96

series sockets and type 86.30 for 90, 92, 94,

95, 96, 97 series sockets

• Wide supply voltage range:

12...240 V AC/DC (86.00)

12...24 V AC/DC or 230...240 V AC (86.30)

• LED indicator

Wiring diagram

• Time scale: from 0.05s to 100h

• Bi-function

• Plug-in for use with 90.02, 90.03, 92.03,

94.02, 94.03, 94.04, 94.54, 95.03, 95.05,

95.55, 96.02, 96.04, 97.01, 97.02, 97.51

and 97.52 sockets

Relay + socket

AI: On-delay

DI: Interval

86.00

86.30

86 Series - Timer modules

II-2014, www.findernet.com

SERIES

Timers and Monitoring relays

Summary of content (12 pages)

PAGE 1
86 SERIES 86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module Timer module type 86.00 for 90, 92, 96 series sockets and type 86.30 for 90, 92, 94, 95, 96, 97 series sockets • Wide supply voltage range: 12...240 V AC/DC (86.00) 12...24 V AC/DC or 230...240 V AC (86.30) • LED indicator • Time scale: from 0.
PAGE 2
86 SERIES 86 Series - Timer modules Ordering information Example: 86 series multi-function timer module, (12...240)V AC/DC supply voltage. 8 6 . 0 0 . 0 . 2 4 0 . 0 Type 0 = Multi-function (AI, DI, SW, BE, CE, DE, EE, FE) 3 = Bi-function (AI, DI) No. of poles See 40, 44, 46, 55, 56, 60 and 62 series relays Poles for chosen relay/socket combination according to chart below 0 Supply version 0 = AC (50/60 Hz)/DC 8 = AC (50/60 Hz) Relay type 40.31 40.61 46.61 40.52/44.52/44.62 46.52 55.32 56.32 60.
PAGE 3
86 SERIES 86 Series - Timer modules Functions U = Supply voltage S = Signal switch LED Type 86.00 LED Type 86.30 = Output contact Supply voltage NO output contact OFF Open ON Open ON Open (timing in progress) ON Closed Without control signal = Start via contact in supply line (A1). With control signal = Start via contact into control terminal (B1). Wiring diagram Type 86.00 (AI) On-delay. Apply power to timer. Output contacts transfer after preset time has elapsed.
PAGE 4
86 SERIES 86 Series - Sockets and accessories Screw terminal (Box clamp) socket panel or 35 mm rail (EN 60715) mount For relay type Accessories Metal retaining clip 6-way jumper link Identification tag Timer module Technical data Double terminal A1 (for easy start connection) Rated values Dielectric strength Protection category Ambient temperature Screw torque Wire strip length Max. wire size for 90.02 and 90.03 sockets 90.03 Approvals (according to type): 90.02 Blue 60.12 90.02.0 Black 90.
PAGE 5
86 SERIES 86 Series - Sockets and accessories 92.03 Approvals (according to type): Screw terminal (Box clamp) socket panel or 35 mm rail (EN 60715) mount For relay type Accessories Metal retaining clip (supplied with socket - packaging code SMA) Identification tag Timer modules Technical data Rated values Dielectric strength Protection category Ambient temperature °C Screw torque Nm Wire strip length mm Max. wire size for 92.03 socket mm2 AWG 92.03 Blue 62.32, 62.33 92.03.0 Black 092.71 092.00.2 86.
PAGE 6
86 SERIES 86 Series - Sockets and accessories Screw terminal (Box clamp) socket 94.02 94.02.0 94.03 94.03.0 94.04 94.04.0 panel or 35 mm rail (EN 60715) mount Blue Black Black Black For relay type 55.32 Blue 55.33 Blue 55.32, 55.34 Accessories 94.04 Metal retaining clip Approvals (according to type): Plastic retaining and release clip 094.71 094.91.3 094.91.30 094.91.3 094.91.30 094.91.3 094.91.30 (supplied with socket - packaging code SPA) 6-way jumper link 094.06 094.06.0 094.
PAGE 7
86 SERIES 86 Series - Sockets and accessories Screwless terminal socket 35 mm rail (EN 60715) mount For relay type Accessories Metal retaining clip Plastic retaining and release clip 6-way jumper link Modules (see table below) Sheet of marker tags, 72 tags, 6x12 mm Technical data Rated values Dielectric strength Protection category Ambient temperature °C Wire strip length mm Max. wire size for 94.54 socket mm2 AWG 94.54 Approvals (according to type): 094.91.3 94.54 (blue) 55.32, 55.34 094.71 094.91.
PAGE 8
6 SERIES 86 Series - Sockets and accessories Screw terminal (Box clamp) socket 95.03 95.03.0 95.05 95.05.0 panel or 35 mm rail (EN 60715) mount Blue Black Blue Black For relay type 40.31 40.51/ 52/ 61, 44.52/62 Accessories Metal retaining clip 95.05 095.71 Plastic retaining and release clip Approvals (according to type): 095.01 095.01.0 095.01 095.01.0 095.18 095.18.0 095.18 095.18.0 (supplied with socket - packaging code SPA) 8-way jumper link Identification tag 095.00.
PAGE 9
86 SERIES 86 Series - Sockets and accessories Screwless terminal socket 95.55 95.55.0 panel or 35 mm rail (EN 60715) mount Blue Black For relay type 40.51/52/61, 44.52/62 Accessories Metal retaining clip 95.55 Approvals (according to type): 095.71 Plastic retaining and release clip 095.91.3 095.91.30 (supplied with socket - packaging code SPA) Timer modules 86.30 Sheet of marker tags for retaining and release clip 095.91.3 060.
PAGE 10
86 SERIES 86 Series - Sockets and accessories Screw terminal (Box clamp) socket panel or 35 mm rail (EN 60715) mount For relay type Accessories Metal retaining clip (supplied with socket - packaging code SMA) Plastic retaining and release clip (supplied with socket - packaging code SPA) 6-way jumper link Identification tag Timer modules Sheet of marker tags for retaining and release clip 094.91.
PAGE 11
86 SERIES 86 Series - Sockets and accessories Screw terminal socket 97.01 97.02 panel or 35 mm rail (EN 60715) mount Blue Blue For relay type 46.61 46.52 Accessories 97.01 Plastic retain and eject clip Approvals (according to type): 097.01 (supplied with socket - packaging code SPA) 8-way jumper link 095.18 (blue) Identification tag 095.00.4 Timer modules 86.30 095.18.0 (black) Technical data Rated current 16 A - 250 V AC Dielectric strength 6 kV (1.
PAGE 12
86 SERIES 86 Series - Sockets and accessories Screwless terminal socket 97.51 97.52 panel or 35 mm rail (EN 60715) mount Blue Blue For relay type 46.61 46.52 Accessories 97.51 Approvals (according to type): Plastic retain and eject clip 097.01 (supplied with socket - packaging code SPA) Timer modules 86.30 Technical data Rated current 10 A - 250 V AC Dielectric strength 6 kV (1.2/50 µs) between coil and contacts Protection category IP 20 Ambient temperature °C Wire strip length 097.