Data Sheet
1
1 NC 1 NO
10/10 10/10
250/250 250/250
2,500 2,500
250 250
0.125 0.125
1/0.3/0.15 1/0.3/0.15
500 (12/10) 500 (12/10)
AgNi AgNi
— –20...+40 +0...+60
— 7 ± 4
–20...+40 +0...+60 —
7 ± 4 —
100·10
3
100·10
3
–45...+80 –45...+80
IP 20 IP 20
7T.81.0.000.240x 7T.81.0.000.230x
Contact specification
Contact configuration
Rated current/Maximum peak current A
Rated voltage/Maximum switching voltage
V AC
Rated load AC1 VA
Rated load AC15 (230 V AC) VA
Single phase motor rating AC3 (230 V AC)
kW
Breaking capacity DC1: 30/110/220V A
Minimum switching load mW (V/mA)
Standard contact material
Temperature setting range
Setting range (ventilation) °C
Switch temperature differential K
Setting range (heating) °C
Switch temperature differential K
Technical data
Electrical life at rated load AC1 cycles
Ambient temperature range °C
Protection category
Approvals (according to type)
• Heating control
Panel thermostat
• Small, compact size (17.5 mm wide)
• Snap action themostatic Bimetal sensor
• Wide temperature setting range
• Long electrical life
• 35 mm rail (EN 60715) mount
• Ventilation control
Features
Min
Max
7T Series - Panel Thermostat
Heating control - Should the panel temperature fall below the (minimum) set
temperature the contact will close to call for heat. The contact will open
when this set temperature is exceeded.
Ventilation control - Should the panel temperature exceed the (maximum)
set temperature then the contact will close to call for cooling.
The contact will open when the temperature falls below this set temperature.