Datasheet

G
Panel thermostat
• Small, compact size (17.5mm wide)
• Snap action themostatic Bimetal sensor
• Wide temperature setting range
• Long electrical life
• 35mm rail (EN60715) mount
7T.81.0.000.240x 7T.81.0.000.230x
• Heating control • Ventilation control
Min
Max
For outline drawing see page 2
Heating control - Should the panel temperature fall below the (minimum)
set temperature the contact will close to call for heat. The contact will open
when this set temperature is exceeded.
Ventilation control - Should the panel temperature exceed the (maximum) set
temperature then the contact will close to call for cooling. The contact will open
when the temperature falls below this set temperature.
Contact specification
Contact configuration 1 NC 1 NO
Rated current/Maximum peak current A 10/20 10/20
Rated voltage/
Maximum switching voltage VAC
250/250 250/250
Rated load AC1 VA 2500 2500
Rated load AC15 (230VAC) VA 250 250
Single phase motor rating AC3 (230VAC) kW 0.125 0.125
Breaking capacity DC1: 30/110/220V A 1/0.3/0.15 1/0.3/0.15
Minimum switching load mW (V/mA) 500 (12/10) 500 (12/10)
Standard contact material AgNi AgNi
Temperature setting range
Setting range (ventilation) °C — –20…+40 +0…+60
Switch temperature differential K — 7±4
Setting range (heating) °C –20…+40 +0…+60 —
Switch temperature differential K 7±4 —
Technical data
Electrical life at rated load AC1 cycles 100·10
3
100·10
3
Ambient temperature range °C –45…+80 –45…+80
Protection category IP 20 IP 20
Approvals (according to type)
1
XII-2015, www.findernet.com
7T
SERIES
7T SERIES
Panel Thermostat