Datasheet

8
X-2018, www.findernet.com
M
1C SERIES
Digital chronothermostats
1C
SERIES
Digital “touch slide” chronothermostat
• Touch display with guided programming
• Chronothermostat “touch slide” ultra-thin
17mm only with wide display
• Easy to use
• Summer/Winter switch
• 24 point for temperature setting
• Basic display lock or advanced with PIN, with
storage of all settings
• Visual and audible confirmation of key and
function entry
• Minimum interval setting 15 minutes
• The weekly function allows each day to be set
to, automatic mode, hand mode, or OFF
• Calibration function
• The thermostat can display, or be controlled
by the external temperature using an external
sensor (optional accessory)
• Input for remote control
• Dynamic icons
• Surface mounting over 3 module wall box
(eg. type 503)
Wiring diagram
1C.61
Colour Daily Program
White RAL 9010 1C.61.9.003.0101
Metallic Anthracite 1C.61.9.003.2101
Technical features
Sensing element NTC
Supply 2 batteries 1.5VAAA
Contact configuration 1 CO (SPDT)
Contact rating 5A/250VAC
Display range 0…+50°C
Temperature setting range
+5…+37°C (with sliders: winter +6…+24°C/summer +18…+30°C)/–20…+90°C (with external sensor)
Temperature differential 0.1…0.9°C
Temperature rate of change —
Nighttime set-back —
Independently set temperature levels Sliders
Thermostat lock Basic or 3 digit PIN
Protection category IP 20
Mounting Surface
Display resolution 0.1°C
Accuracy at +20°C +/–0.5°C
Frost Protection +2…+8°C
Weekly/Daily Daily + 7 Daily
Minimum programming interval 1h or 15minutes - daily/weekly (weekly: only Auto, Manual and OFF mode)
Energy saving function —
Push buttons Touch screen
Supervisory control NO
Back-light display YES
Communications —
APP programming —
Approvals (according to type)