User's Manual

Page 2
Armband modules
● Take a FinchShift™ armband module
● Put on the armband module as such that the module is five centimeters above the
elbow and that the oval button is facing towards the user’s head
● Secure the module using the Velcro’s, so that the armband module sits tightly on
your arm. For the most comfortable experience, make sure that the Velcro is
attached in the direction of the user’s body.
Controller
● Grab the FinchShift™ controller as such that the index finger is located on the trigger,
and the middle finger is located on the “grip” button
Calibration of the devices
By default, when the 'gaming mode' is launched a calibration of the FinchShift controller is
offered for further use. It is important to carry out the calibration process precisely as
described in the instruction, to minimize tracking inaccuracy.
● Carry out the calibration instructions strictly as described on the screen:
● Extend your arms forward while holding the controllers, making sure they are on neck
level and that the elbows are in the straightest position possible
● While holding this pose, press down on the oval buttons of both controller until a
vibration occurs. The calibration is complete.
● If you wish to calibrate the controllers through optical calibration (which produces
more accurate result), press the ‘App’ button during the standard calibration method.
*If during use, the tracking of arms is significantly inaccurate compared to the arms’ actual
position, it is possible to recalibrate by completing steps 1 and 2
We are happy that you successfully completed the controller installation process! Enjoy your
use of the controllers!