Quick Start Guide

Step 3
1. Attach the CL Runner (O) to the Left Side Panel (3) with three M3.5x16MM Screws (E)
and tighten with a screwdriver (not supplied).
Note:
Use the CL mark on the CL Runner (O) to correctly attach the Left Upright Partition (7) as
shown below.
2. Attach the CR Runner (O) to the Right Side Panel (4) with three M3.5x16MM Screws (E)
and tighten with a screwdriver (not supplied).
Note:
Use the CR mark on CR Runner (O) to correctly attach the Right upright partition (8) as
shown below.
11
E
E
E
x 6
O
x 1
CR
CL
CL
CR
CL CR
3 4