Instructions/Assembly Guide

Step 5
WE STRONGLEY RECOMEND ATTACHING THIS UNIT TO THE WALL TO
PREVENT THE TABLE FROM TOPPLING OVER.
Wall straps are already pre-assembled on table.
Assembly Steps to attach your table to the wall
1. Use a pencil to mark the fixing positions on the wall.
2. Drill holes and insert appropriate wall plugs into the wall (not provided).
3. Place the product against the wall and ensure that the strap is under top panel.
4. Secure the wall straps to the wall with appropriate screws for your wall type (not
provided) and tighten with a screwdriver.
Warning:
1. Please note this item needs to be attached to the wall to prevent falling forward
when product is in use.
2. Always ensure the intended wall area to be drilled is free from hidden electrical
wires, water and gas pipes.
NB: Wall fixings are not included. Please source suitable fixings for your wall type.
If in, consult a qualified trades professional.
10