Instructions/Assembly Guide

1
1. Remove all parts from the carton and place them on a protected surface or
carpet.
2. Make sure all parts and hardware match the Parts List.
3. Attach the Left Wing (2) and Right Wing (3) to the back of the Headboard (1) with
M8x50mm Bolts (F), Spring Washers (B) and M8x30mm Flat Washers (C).
Tighten by hand using the. M8 Allen Key (D).
Assembly Instructions
King Bed
(1)
(2)
(3)
(D)
(F)
(B)
(C)
6