User Manual

24
Note: In case of AC adapter connected to the unit, this will be always indicated by at least
one LED ON or blinking, even if the battery is missing or fully charged when the unit is OFF.
Note To maximize the performance and the life of your battery, it is worth to deplete the
battery charge to less than 10% every two weeks.
To deplete the battery, use your CliniScape on battery power only until you hear a
notification from the Operative system that the battery charge is less than 10%.
The below table indicates the three LED behaviour (Battery LEDs and Power LED).
Table 4 - LED status and battery conditions vs. MCA status
BATTERY
CONDITION
MCA STATUS
Battery Good Battery Empty
Power ON
Standby
OFF / Hibernate (on battery) OFF OFF OFF
OFF / Hibernate (On AC adapter) OFF OFF 20% Blinking
ON ON OFF ON
CHARGED (on battery)
OR
FULLY CHARGED (on
AC adapter)
Stand-by OFF OFF 50% Blinking
OFF / Hibernate OFF ON OFF
ON ON ON ON
CHARGING
(Not Critical)
Stand-by OFF ON 50% Blinking
OFF / Hibernate OFF ON OFF
ON 50% Blinking ON ON
CHARGING
(Critical)
Stand-by OFF ON 50% Blinking
OFF / Hibernate OFF OFF OFF
ON OFF 50% Blinking ON
NOT CHARGING
(Critical)
Stand-by OFF 50% Blinking 50% Blinking
OFF / Hibernate OFF OFF 10% Blinking
ON 50% Blinking 50% Blinking ON
BATTERY NOT
PRESENT
(MCA connected to
AC Adapter)
Stand-by 50% Blinking 50% Blinking 50% Blinking
WARM SWAP Suspend to RAM OFF OFF OFF