Installation guide

2
I ntroduction
Congratulations on your purchase of the CleanAlert FILTERSCAN
®
WiFi Air Filter Monitor . The
CleanAlert FILTERSCAN WiFi Air Filter Monitor continuously and automatically monitors the
clogging* of an air filter installed into a household or commercial forced air heating, air conditioning, or
heat pump system and provides alerts when the filter clogs and needs to be replaced.
The CleanAlert AirFilterSentry
™
Notification Service will send you a text message alert and or
email alert notifying you of the clogging* of an air filter installed into your household or commercial
forced air heating, air conditioning, or heat pump system. The system monitoring service is located at
www.cleanalertwifi.com where you may register your FILTERSCAN WiFi Air Filter Monitor and
sign up for the CleanAlert AirFilterSentry Notification S ervice. In addition to receiving text and or
email notifications, you can check on the status of your air filter as it becomes more and more dirty
over time before reaching clogged* status.
*NOTE: “Clogging” is defined as when the differential air pressure in the HVAC system doubles
from its calibrated clean or new air filter value.
IMPORTANT! Please read all instructions carefully to insure years of trouble-free operation.
In The Box
1. FILTERSCAN WiFi Air Filter Monitor , Model FS-245-B or FS-245-C
2. 4 Energizer Ultimate Lithium "AA" Batteries (FS-245-B model only)
3. Read This First document - Critical
4. Quick Start Guide
5. Drill Template to locate mounting holes in a return air plenum
6. Mounting Screws
7. Packaging / box
•
••
• Optional: CA-360 external AC/DC wall adapter power supply. (If ordered for the Model FS-
245-B only, it is useful when there is a wall outlet available within 6’ of the FILTERSCAN
mounting location, and it eliminates the need for batteries.)
•
••
• Optional: CA-4DP Tubing Kit. (If ordered with either FS-245-B or FS-245-C, this 6’ long
Tubing Kit is used to have the FILTERSCAN monitor differential pressure across the air
filter. It is especially useful when the FILTERSCAN is mounted in an attic or crawl space,
or when the air handler is located outside the building (since the FILTERSCAN must be
mounted indoors). Call or email to order longer length tubing.
Tools Required
1. Power Drill
2. 7/64” Drill bit
3. 3/8” Drill bit or Step Drill
4. #2 Phillips Screwdriver
5. ½” Drill Bit (for Model CA-4DP Tubing Kit only)
6. Eye and Ear Protection
7. Dust Mask
SAFETY WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions may result in electrical shock or serious
personal injury.