Installation guide

22
W arranty
Limited warranty Please refer to www.cleanalert.com/termsofsale.html for full warranty text.
For a period of one (1) year following the date of purchase of the Product, if the Product ceases to function
and/or functions improperly due to a defect in material or workmanship, CleanAlert, LLC will repair or
replace the Product (at its sole discretion) free of charge to the customer. This warranty does not apply to:
1. Damage caused by accident, abuse or mishandling of the Product after it has left CleanAlert,
LLC’s facility;
2. Acts of God;
3. Units which have been subject to unauthorized repair and/or have been taken apart or otherwise
modified;
4. Units damaged from installation or use not in accordance with these instructions;
5. Damages exceeding the cost of the Product; and
6. Damages that are considered normal wear and tear (in CleanAlert, LLC’s sole discretion).
A Product requiring warranty service shall be sent by the customer to CleanAlert’s facility in West Chester,
PA. This warranty does NOT cover the costs of having the Product transported to CleanAlert, LLC for
warranty service. The customer is responsible for safely sending the Product to CleanAlert, LLC.
W i F i
Transmitter
The FILTERSCAN WiFi Air Filter Monitor contains a WiFi radio module operating at a frequency
of 2.4GHz, which is activated periodically. Transmissions to the AirFilterSentry Notification
Service, are very short in duration.
Each FILTERSCAN WiFi Air Filter Monitor has been assigned a unique MAC address at the
time of manufacture.
Remote Update
The FILTERSCAN WiFi Air Filter Monitor has the ability to allow the AirFilterSentry
Notification Service to update the Monitor software. During user configuration on the
AirFilterSentry Notification Service website, if you checked the “Allow Automatic Updates to your
FILTERSCAN Software?” box on the Edit Monitor screen and there is a later version of software
available on the server, your FILTERSCAN WiFi Air Filter Monitor will automatically download
the latest version of software and update itself without any action by you. The update will be
transparent and all operating parameters will be intact after the update.
1. Software updates will be made available by the AirFilterSentry Notification Service.
2. When an update is made available, the Notification Service will send an update command to
the FILTERSCAN WiFi Air Filter Monitor in response to the Monitor’s periodic status
message.
3. If you’ve elected to receive automatic updates, the Monitor then downloads and validates the
new software.
4. No further action is required on your part.