Installation guide

13
Figure 12: WiFi Status LED and WPS Button Locations
Table 1 WiFi Status indications (Locate the internal WiFi Status Indicator above. The Heartbeat
and other normal, non-WiFi status indications which appear on the STATUS LED are
shown elsewhere in this manual.)
WiFi Status LED Blink Indication Notes
None Normal operation
Attempting connection to
WiFi network
Continuous slow
Yellow flashing
In process of connecting to the
Access Point or Wireless
Router after the WPS button is
depressed
No WPS access point
found
Flashes Red 4 times,
pattern repeats 3 times.
Did not find the access point or
wireless router (highest priority).
Check to insure other devices
(laptop or mobile device) can
connect to your LAN
Error Connecting to WiFi
network after Access
Point configuration
Flashes Red 2 times,
pattern repeats 3 times.
Check to insure other devices
(laptop or mobile device) can
connect to your LAN
Error Connecting to WiFi
network
Flashes Red 3 Times,
pattern repeats 3 times.
Check to insure other devices
(PC, laptop or mobile device)
can connect to your LAN
Error Connecting to the
Cloud Server
Flashes Red 5 Times,
pattern repeats 3 times.
Check to insure other devices
(PC, laptop or mobile device)
can access
www.cleanalertwifi.com to test
server operation
Message refused by the
Cloud Server
Flashes Red 6 Times,
pattern repeats 3 times.
MAC address not yet entered in
the AFS database. Insure that
you signed up your Monitor as
directed in the AFS Notification
Service User Configuration
section earlier in this manual
In process of resetting Continuous Fast Red No action required
WiFi Status Indicator
Zero/Clean Button
WPS Button