Installation Guide
28 
Local Alarm Indications 
Monitor/Transmitter Alarm Indications 
Alarm Condition 
Alarm Indication 
Clear Alarm Procedure 
Normal Operation 
STATUS LED flashes green every minute.  
None 
Clogged Filter 
STATUS LED flashes red five times every 
ten minutes. Beeper sounds with LED flash, 
if ambient light is present. 
Replace Filter and 
Recalibrate 
Low Battery 
STATUS LED flashes yellow every minute. 
Replace Batteries 
Sensor Failure 
STATUS LED continuously on red for 5 
seconds, every 10 minutes. Beeper sounds 
with LED, if ambient light is present.  
Contact CleanAlert 
Customer Service at 888-
414-3569 










