8515/07189 Respirator N95 Particulate 3M recommended for welding, brazing, metal pouring and cutting User Instructions (Keep insert for reference) 07189 is a catalog number only. NIOSH approved as 3MTM 8515 N95 Particulate Respirator. See insert for approval label. Distributed by: TM .
This respirator helps protect against certain particles. Misuse may result in sickness or death. For proper use, see supervisor, or instructions, or call 3M in U.S.A., 1-800-247-3941. In Canada, call Marketing at 1-800-265-1840, ext. 6137 or Technical Service at 1-800-267-4414. IMPORTANT: Before use, wearer must read and understand these User Instructions. Keep insert for reference. Use For: Solids such as those from processing minerals, coal, iron ore, flour, and certain other substances.
Time Use Limitation: If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area and replace the respirator. Fitting Instructions: to be followed each time respirator is worn. Fig. 1 Fig. 2 Fig. 3 Fig. 4 1. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand. 2. Position the respirator under your chin with the nosepiece up.
sides of your head. If you CANNOT achieve a proper seal, DO NOT enter the contaminated area. See your supervisor. Removal Instructions: See step 2 of Fitting Instructions and cup respirator in hand to maintain position on face. Pull bottom strap over head. Still holding respirator in position, pull top strap over head and remove respirator. NIOSH Approved: N95 At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
FOR MORE INFORMATION and assistance on 3M occupational health and environmental safety products, contact your local 3M representative or call 3M OH&ESD Technical Service toll free in U.S.A., 1-800-243-4630. In Canada, call Marketing at 1-800-265-1840, ext. 6137 or Technical Service at 1-800267-4414. Exported by/Exporté par/ Exportado por: 3M Occupational Health and Environmental Safety Division 3M Center, Building 235-2W-70 P.O. Box 33010 St. Paul, MN 55133-3010 Made in U.S.A.
