Owner manual

2 . 3
TM04A, TM04C & TM04D Parts List
TM04C
303 SS
400 PSI 1500 PSI 2500 PSI 400 PSI 1500 PSI
REF Description QTY 28 BAR 103 BAR 173 BAR 28 BAR 103 BAR
1. Meter cover plate 1 CP2501 CP2506C CP8575 CP9500 CP9501
2. Screw , cover plate (1/4-20 x 1/2 SHCS, SS) 4 FS9812 FS9812
Screw , cover plate (1/4-20 x 5/8 SHCS) FS1802 FS1802
FS1901
3. Meter body w ith posts, 1/2" NPT ports 1 MB8575-1
Meter body w ith posts, 1/2" BSP ports
4. O-ring, cover plate, Viton 1
O-ring, cover plate, Teflon SL2138
5. Pulser retainer ('Top Hat') 1 MP8550
6. Screw , pulser retainer (8-32 x 1" SHCS SS) 4 FS1901
7.
Lock nut 1 MP2541
8.
Hall Effect sensor (pulser).
1 EL5581-HPHE
9.
PPS, Low Viscosity/Temperature Nom. 805 PPG (213 ppl
)
1 (std. 2009+)
Gear Nom. 403 PPG (106 ppl) (std. pre-2009)
Set PPS, High Temperature (or high viscosity) Nom. 805 PPG (213 ppl) (optional)
Nom. 403 PPG (106 ppl) (optional)
8.
Reed Sw itch sensor (pulser),
1 EL5581-HPRS (optional)
9. PPS, Low Viscosity/Temperature 1 GS540R190 (optional)
PPS, High Temperature (or high viscosity) GS540RMV190 (optional)
M M 04P 2009-06
2009
:
400 PSI (28 BAR) version being phased out
For use with FPP battery powered electronic register
When used with non-FPP electronics, a PIA-300 signal conditioner is often required.
A
nod. Alum inum 316 Stls. Steel
GS540RMV380
GS540RMV760
MB95011
MB95021
na
K Factor (pulse resolution) is nominal
. Individual f low meters vary, and are subject
to up to 3-4% shift on liquids w ith viscosity > 100 cSt.
SL2138 (opt.) SL2138
MP2086
FS9812 FS9812
MS2541 MS2541
GS540R380
GS540R760
SL1138 (std.)
TM04A TM04D
MP2086
MB25011
MB25021