Instructions / Assembly

Plumbing Installation
IMPORTANT! Remote dispensers and tank top pumps must be installed in accordance with
all local, state, and national electrical code NEC/ANSI/NFPA 70, NFPA 30, NFPA 30A, and
NFPA 395.
Your Fill-Rite dispenser cabinet should be installed in a manner that does not use the plumbing to
support the cabinet in any way. Safety and Emergency equipment should be installed per local,
state, and national plumbing for ammable fuels guidelines. The following plumbing diagrams are
suggestion for typical installation scenarios.
Item Description
1 Remote Pump (for use with FR102PHU, FR902DPU)
2 Electrical Conduit (Threaded rigid conduit, sealed ttings, conductor seal)
3 Wall Mounted Cabinet Dispenser (FR902DPU)
4 Fluid Inlet Pipe (Threaded pipe joints and connections should be sealed)
5 Safety Breakaway Valve
1
2
3
4
5
2
CAUTION! Threaded pipe joints and connections should be sealed with the appropriate
sealant or sealant tape to minimize the possibility of leaks.
Typical Wall Bracket Mount Plumbing
6