Product Manual

4
PRODUCT SPECIFICATIONS
Model Number FR1612 FR1614 FR1616
Description
12 VDC rotary vane
pump only and
strainer
12VDC rotary vane
pump with hoses,
nozzle , strainer,
clamps, barbed inlet
and outlet adapters.
12VDC rotary vane
pump with hose,
nozzle, adjustable
poly suction pipe,
strainer, clamps,
barbed outlet adapter.
Warranty 1 Year 1 Year 1 Year
Construction—Pump Housing Cast Iron Cast Iron Cast Iron
Maximum flow rate (with factory supplied hose & nozzle) Up to 10 GPM Up to 10 GPM Up to 10 GPM
Rotor Composition Iron Iron Iron
Motor Horsepower 1/5 HP 1/5 HP 1/5 HP
Amp Draw 17Amp 17 Amp 17 Amp
RPM 3800 3800 3800
Voltage 12 VDC 12 VDC 12 VDC
Fuse in power cable 30 Amp 30 Amp 30 Amp
Inlet 3/4” NPT 3/4” NPT 3/4” NPT
Outlet 3/4” NPT 3/4” NPT 3/4” NPT
Vane Material Acetal Acetal Acetal
Duty Cycle 30 Minutes 30 Minutes 30 Minutes
Internal Bypass valve Yes Yes Yes
Seal Material (Rotor Cover Seal / Shaft Seal) NBR / HNBR NBR / HNBR NBR / HNBR
Box Contents
Nozzle No Yes Yes
Hoses No Yes Yes
Poly Suction Tube No No Yes (3/4” NPT)
Strainer for Inlet Yes Yes Yes
Power Cable
6.5’ cable with fuse and
battery clips.
6.5’ cable with fuse
and battery clips.
6.5’ cable with fuse and
battery clips.
PRODUCT WARRANTY
Tuthill Transfer Systems (“Manufacturer”) warrants to each consumer buyer of its products (the “Buyer ”), from the date of invoice or sales receipt, that
goods of its manufacture (“Goods”) will be free from defects of material and workmanship. Duration of this warrant y is as follows:
Standard D uty Products – One year
Manufacturer ’s sole obligation under the foregoing warranties will be limited to either, at Manufacturers option, replacing or repairing defective Goods
(subject to limitations hereinafter provided) or refund- ing the purchase price for such Goods theretofore paid by the Buyer, and Buyer ’s exclusive remedy for
breach of any such warranties will be enforcement of such obligations of Manufacturer. If Manufac turer so requests the return of the Goods, the Goods will
be redelivered to Manufacturer in accordance with Manufacturer ’s instructions F.O.B. Factory. The remedies contained herein shall constitute the sole
recourse of the Buyer against Manufacturer for breach of warranty. IN NO EVENT SHALL MANUFACTURER ’S LIABILITY ON ANY CLAIM FOR DAMAGES
ARISING OUT OF THE MANUFAC TURE, SALE, DELIVERY, OR USE OF THE GOODS EXCEED THE PURCHASE PRICE OF THE GOODS. The foregoing
warranties will not extend to Goods subjected to misuse, neglect, accident or improper installation or maintenance, or which have been altered or repaired
by anyone other than Manufacturer or its authorized representative. THE FOREGOING WARRANTIES ARE EXCLU- SIVE AND IN LIEU OF ALL OTHER
WARRANTIES OF MERCHANTABILIT Y, FITNESS FOR PURPOSE OF ANY OTHER T YPE, WHETHER EXPRESS OR IMPLIED. No person may var y the
foregoing warranties and remedies except in writing signed by a duly authorized officer of Manufacturer.
Warrantiesorremediesthatdifferfromtheforegoingshallnot otherwisebe binding on Manufacturer. The Buyer ’s acceptance of delivery of the Goods constitutes
acceptance of the foregoing warranties and remedies, and all conditions and limitations thereof.
FR1612H1253 Rev3
The FR1600 series pump has been tested and complies with the European Community Directive 2006/42/EC, Directive on
Machinery. The following standards were used to verify conformance.
EN 809 “Pumps and pump units for liquids – Common safety requirements”
EN ISO 12100 “Safety of Machinery – Basic concepts, general principles for design”
2014/30/EU “Electromagnetic compatibility”
2011/65/EU “Restrictions of the use of certain hazardous substances in electrical and electronic equipment”