User Manual

Image Broadway 6 Help

Image Adjustments > Color and Tonal Adjustments > Make Color Corrections >

Color Balance

You can change color balance by using the Adjust/Enhance > Darkroom > Color Balance Command. Select the Color

Balance menu item to open the Darkroom toolbox. This and other menu commands are grayed out when the

Darkroom toolbox is open. Click the OK or the Cancel button in the Darkroom toolbox before you can access this and

other menu command.

Select Shadow, Midtone, or Highlights from the pull down menu below the Red, Green, and Blue bars.1.

Mouse over the Darkroom toolbox Red, Green or Bluen slider, which divides the blue (left) and gray (right)

parts of the bar, and drag it to make changes. You can also use the left and right arrows above the bar to make

changes. Dragging to the right will increase its value and vice versa.

Use the slider or the left and right arrows above it to adjust the red-cyan, green-magenta, or blue-yellow

balance. More red gives less of the complementary cyan and so on.

Check off Preserve Luminosity to keep the tonal balance.4.

When Preview is checked off, the image will be changing when the settings vary.5.

Press the Undo button to undo the change.6.

Press the OK button to confirm the changes or the Cancel button to restore the original image before the

command.