User Manual

Image Broadway 6 Help

Image Adjustments > Color and Tonal Adjustments > Make Color Corrections >

Hue/Saturation

You can change Hue and Saturation by using the Adjust/Enhance > Darkroom > Hue/Saturation Command. Select

the Hue/Saturation menu item to open the Darkroom toolbox. This and other menu commands are grayed out when

the Darkroom toolbox is open. Click the OK or the Cancel button in the Darkroom toolbox before you can access this

and other menu command.

Mouse over the Darkroom toolbox Hue or Saturation slider, which divides the blue (left) and gray (right) parts

of the bar, and drag it to make changes. You can also use the left and right arrows above the bar to make

changes. Dragging to the right will increase its value and vice versa.

Enter or drag the Hue slider to change the hue value.2.

Enter or drag the Saturation slider to change the saturation value.3.

The image is changing when the setting varying. Press OK to keep the image. Press Cancel to restore the

original image before the command.

When Preview is checked off, the image will be changing when the settings vary.5.

Press the Undo button to undo the change.6.

Press the OK button to confirm the changes or the Cancel button to restore the original image before the

command.