User Manual

Image Broadway 6 Help

Image Adjustments > Color and Tonal Adjustments > Adjust Brightness and

Contrast > Brightness/Contrast

Brightness/Contrast

You can change brightness and contrast by using the Adjust/Enhance > Darkroom > Brightness/Contrast Command. Select

the Fill Flash menu item to open the Darkroom toolbox. This and other menu commands are grayed out when the Darkroom

toolbox is open. Click the OK or the Cancel button in the Darkroom toolbox before you can access this and other menu

command.

At the bottom of the toolbox, choose from Master (All colors), Red, Yellow, Green, Cyan, Blue, or Magenta.1.

Mouse over the slider, which divides the blue (left) and gray (right) parts of the slider, and drag it to make changes.

You can also use the left and right arrows above the bar to make changes. Dragging to the right will increase its value

and vice versa.

Enter or drag the slider to change the hue.3.

Enter or drag the slider to change the saturation.4.

Enter or drag the slider to change the luminocity (lightness).5.

When Preview is checked off, the image will be changing when the settings vary.6.

Press the Undo button to undo the change.7.

Press the OK button to confirm the changes or the Cancel button to restore the original image before the command.8.