Table of Contents What Is In The Box 1 Specifications 2 Basic Operation 3 Rear Panel Interface Operation 4 Accessories Overview 5 Specifications 6 For Your Safety 6
What Is In The Box • Q500 Light • 4 Leaf Barndoor • 5-Inch Fresnel Lens • Cable Tie • PowerCon Cable 1
Parts Diagram 1 11 2 3 10 4 5 9 6 7 8 13 12 14 23 1 Vent Holes 2 Top Latch 3 Size 3 Accessory Holder 4 Magnetic Mount 5 Light Source 6 Focusing Knob 7 Junior Pin Reciever 8 Stand Locking Pin 9 Yoke 10 Tilt Lock Lever 11 Handles 12 DMX Address Knob 13 LCD Display 14 Yoke Bolt 15 CCT Tuning Knob 16 HUE Tuning Knob 17 DMX Output (XLR -Female 5-Pin) 15 16 22 17 18 19 21 20 2 18 USB Port (Mini USB) 19 PowerCon Connection Port 20 On/Off Button 21 DMX Input (XLR
Basic Operation •Turning The Light On Insert the PowerCon cable into the PowerCon Connection Port (19) and rotate clockwise to lock in place. Plug the light in to an appropriate outlet. The On/Off Button (20) will light red to signify it is in stand-by mode. Press the On/Off Button (20) to turn on the light. The On/Off Button (20) will light green to signify it is in working mode • Positioning The Q500 To adjust the Q500, grasp the Handles (11) then loosen the Tilt Lock Lever (10).
Rear Panel Interface Operation KNOB CCT PWR HUE DMX RANGE 2800K~6500K 100%-5% ± .25 Magenta / Green 0 ~ 512 Set Set Set Set FUNCTION color temperature intensity HUE value DMX address Flashing underscore HOW TO ASSIGN DMX ADDRESS: 1. Double click the DMX Address Knob (12) to activate the DMX Address Section of the LCD Display. Once activated, a blinking line will appear below the DMX Display Area. 2. Rotate the DMX Address Knob (12) until desired address appears. 3.
Accessories Overview The Q500 is equipped with two ways of attaching accessories: Magnetic Mount (4) and Size 3 Accessory Holder (3). MAGNETIC MOUNT (4) Two magnets are located on the outer diameter of the Light Source (5). Fiilex Magnetic Accessories will mount onto the Q500 when the 5-inch Fresnel Lens has been removed. Not all accessories are designed to handle the intense output of the Q500. Do Not use the Magnetic Gel Holder with the Q500.
Specifications Size (without Barndoor) 305mm X 325mm x 380mm( With yoke ) Weight (Includes Yoke) 12 lbs / 5.
Any product, unit, or part returned to Fiilex must be packaged in a suitable manner to ensure the protection of such product, unit, or part. The package must be clearly and prominently marked with a Return Authorization Number (RA#) to indicate that the package contains returned products, units, or parts. All returned products, units, or parts must be accompanied by a written explanation of the alleged problem or malfunction. Fiilex.com 1689 Regatta Blvd., Richmond, CA 94804 (510)-620-5155 | fiilex@fiilex.
